Heat Guns
Grainger Undr Flr Elc Heat Systm 30 ft.x18 240V
The Grainger Approved Under Floor Electric Heat System is 30 feet long by 18 inches wide and operates on 240 volts. It provides radiant floor heating for areas up to 54 square feet. The system features a thin, flexible heating wire that is sandwiched between layers of fiberglass mesh. It can be installed under many types of flooring including tile, stone, laminate, hardwood and carpet. The wire heats to a uniform 105°F across the entire mat. This underfloor heating mat comes with a built-in thermostat to control the temperature.
Ace Glass, Inc. Heat gun, Master-Mite; 10008, 650°F, 3.8CFM, 1.75lbs, cULus rated
Economical, compact, flameless heat gun for heat shrinkage as well as countless other industrial applications. Input is 120v, 5.4 amps. Supplied with 2.1m, three-conductor grounded cord. Unit consists of heat gun with silver nozzle and deflector adapter. CULus Listed
Grainger Undr Flr Elc Heat Systm 50 ft.x18 120V
The Grainger 14C443 is a 2-ton capacity hydraulic bottle jack made of steel with a wide base for stability. It has a built-in overload valve to prevent over-extension and can lift loads up to 4 inches high, with a minimum height of 5.88 inches. This compact hydraulic jack has a handle that allows the user to pump and raise the lifting arm easily. Its lightweight, portable size makes it ideal for automotive and machinery lifting applications.
MANDEL SCIENTIFIC INC GAS TUBE DRYER SET FOR NSX2100
- Gas tube dryer set designed for NSX-2100 series analyzers.
- Utilizes fluoropolymer-based hollow fiber membrane technology.
- Effectively removes water vapor from gas streams.
- Prevents moisture interference in analytical measurements.
- Passive operation—no external power required.
- Lower running costs and easy integration into lab setups.
- Compact and lightweight design for flexible installation.
- Low maintenance requirements.
- Compatible with NSX-2100 series analyzers.
- Inlet gas pressure maximum: 0.85 MPa (120 psig).
- Purge gas pressure maximum: 0.05 MPa (7.1 psig).
- Overall dryer length: 690 mm (27.2 in).
- Purging gas port distance: 600 mm (23.6 in).
- Typical purge gas flow ratio: 10-20% of supply gas flow rate.
- Mountable in any position.